Handcuff Holders
Carry cuffs your way on a duty belt, battle belt or vest. Choose an enclosed pouch or case with a built-in cuff key holder, a flex cuff holder or a low-profile handcuff strap.
Showing all 5 results
-
Duty Belts And Accessories, Handcuff Holders
Price range: $35.97 through $41.97 Select options This product has multiple variants. The options may be chosen on the product page -
Duty Belts And Accessories, Handcuff Holders
Price range: $35.97 through $47.97 Select options This product has multiple variants. The options may be chosen on the product page -
Duty Belts And Accessories, Handcuff Holders
Price range: $43.97 through $55.97 Select options This product has multiple variants. The options may be chosen on the product page -
Duty Belts And Accessories, Handcuff Holders
Original price was: $19.97.$17.97Current price is: $17.97. Select options This product has multiple variants. The options may be chosen on the product page -
Showing all 5 results
Which handcuff holder fits your setup
Enclosed Handcuff Pouch
A compact, enclosed carrier with a hook-and-loop cover that keeps cuffs secure and out of sight. It also has a built-in cuff key holder. It fits most chain or hinge-style handcuffs and fully encloses small cuffs; large cuffs may leave some hook-and-loop showing, but the cover still closes. It mounts to MOLLE on a belt or vest, and the included Easy Tape lets you wear it on a non-MOLLE belt too, or add two coordinating MOLLE straps for $12. Available in Black, Ranger Green and Multicam Classic. It also holds NARCAN, ZYN or other small essentials.
Double Enclosed Handcuff Pouch
A double-width enclosed pouch that holds two small handcuffs while using less belt space than two single carriers. Remove the divider and it holds one set of leg irons. It fits all MOLLE belts and has tie-down capability. It also has a built-in cuff key holder. Optional MOLLE straps (+$12) are recommended for added retention. Available in Black and Ranger Green.
Gen 2 Handcuff Case
An extremely lightweight, abrasion-resistant case with a handcuff key storage slot. A metal button snap closes it, and elastic plus a grippy interior lining hold your cuffs in place. Choose MOLLE or belt-mounted. A fastener is included with the MOLLE mount if you skip the coordinating MOLLE strap (+$6). One size fits most.
Flex Cuff Holder
Built for disposable restraints, it carries one or two ASP/UZI-style flex cuffs, held by a CURV® center divider with elastic on both sides. The hook-and-loop mount sits above or below the belt line, or on the loop field of a plate carrier, without changing your existing layout. About 5″ x 4.25″. Available in Black, Ranger Green and Coyote Brown.
Handcuff Strap
The most space-efficient way to carry cuffs on a duty or battle belt. Two layers of Squadron, a one-way Lift-the-DOT stud fastener and a hook-and-loop attachment hold your cuffs in place. Built for 2″ duty belts and also works with 1.75″ battle belts.
Compare handcuff holders
| Holder | Holds | Closure / retention | Mounting | Colors |
|---|---|---|---|---|
| Enclosed Handcuff Pouch | 1 pair (most chain or hinge cuffs) | Hook-and-loop cover and cuff key holder | MOLLE belt or vest; Easy Tape included for non-MOLLE belts; MOLLE straps +$12 | Black, Ranger Green, Multicam Classic |
| Double Enclosed Handcuff Pouch | 2 small pairs, or 1 set of leg irons | Enclosed cover, removable divider, tie-down and cuff key holder | MOLLE belts; MOLLE straps +$12 recommended | Black, Ranger Green |
| Gen 2 Handcuff Case | 1 pair, one size fits most | Metal button snap, elastic and grippy lining | MOLLE or belt-mounted; MOLLE strap +$6 | See product page |
| Flex Cuff Holder | 1–2 ASP/UZI-style flex cuffs | CURV® divider and elastic | Hook-and-loop on belt or plate carrier | Black, Ranger Green, Coyote Brown |
| Handcuff Strap | 1 pair | One-way Lift-the-DOT stud | Hook-and-loop on 2″ duty belts (works on 1.75″ battle belts) | See product page |
Mounting and fit notes
Every pouch and case here works with MOLLE, and the 2″ MOLLE Duty Belt Lite gives you a full MOLLE platform. On a non-MOLLE belt like the 2″ Standard Duty Belt Lite, use the included Easy Tape: it threads through the pouch’s MOLLE, folds over the belt and overlaps on itself. The belt-mounted Gen 2 Handcuff Case and the Handcuff Strap also fit directly. Oversized cuffs fit the enclosed pouches with some hook-and-loop showing, and traditional ASP models fit when cinched down small. See the rest of our duty belts and accessories.
Handcuff holder FAQs
Which handcuff holder holds two pairs of cuffs?
The Double Enclosed Handcuff Pouch holds two small handcuffs. Remove the divider and it holds one set of leg irons.
Will large or ASP handcuffs fit?
Both enclosed pouches close over large handcuffs, though some hook-and-loop may show toward the bottom. More traditional ASP models fit if you cinch them down small.
Which holder has a spot for my handcuff key?
The Enclosed Handcuff Pouch, the Double Enclosed Handcuff Pouch and the Gen 2 Handcuff Case all have a built-in spot for your handcuff key.
Can I use a MOLLE pouch on a belt without MOLLE?
Yes. The included Easy Tape threads through the pouch’s MOLLE, folds over your belt and overlaps on itself.
Can I wear a handcuff holder on a vest or plate carrier?
Yes. The Enclosed Handcuff Pouch mounts to a vest with MOLLE, and the Flex Cuff Holder attaches to the loop field of a plate carrier.
What’s the slimmest way to carry cuffs on my duty belt?
The Handcuff Strap saves the most belt space. It’s built for 2″ duty belts and also works with 1.75″ battle belts.
What’s the warranty and shipping?
All Blue Alpha accessories carry a one-year warranty covering craftsmanship and defects. Orders typically ship in 2–5 business days with free US shipping via USPS Ground Advantage, and you have 30 days from delivery to return.